Glue is a means of gluing different materials, it is used in the home and in industry, and for many other purposes. In some situations, the glue ends up in undesirable places, leaving dried lumps and hard to remove stains. If such a situation occurs, use folk, proven methods to dissolve the glue in order to further remove the stain. What to use to clean the glue? The variety of methods designed to remove glue stains is surprising. Let’s consider what are the most effective remedies recommended to achieve the task at hand?

Water

Water is a popular solvent. The main advantage is its versatility. The use of water is justified only if the adhesive is water-based. The effectiveness of the method is due to the following fact: adhesives are often created on the basis of water. However, a favorable outcome of the procedure is possible only if the glue has not had time to dry completely. Only then is it possible to remove the glue in the minimum amount of time. Collect the excess glue with a rag, blotting the treated area with plain water. Repeat these steps until the glue is completely gone. The method will not work if the glue is completely dry.

Alcohol

Alcohol is a classic solvent that allows you to remove various adhesive compounds by eliminating the original properties characteristic of the components of the glue. Alcohol is recommended to use as follows: apply the alcohol to the dried glue. After a few minutes, you will notice a favorable change. The main task is to soften the glue, after which you can remove it with any improvised means.

Acetone

Soak a cotton pad, rag in a small amount of liquid, which is designed to remove varnish coating. Put the moistened absorbent cotton on the glue and wait a few minutes. The glue will dissolve over time. Subsequently, use a hard sponge to wipe off the softened glue. Repeat until the adhesive is completely removed. Acetone removes the bonding elements created between the adhesive and the object. The product guarantees maximum benefit in removing many types of glue. Please note: synthetic materials are vulnerable to acetone, so it is advisable to check the effect of the product on the object and then carry out the procedure.

Oil

Glue that shows resistance to water, alcohol and acetone can be removed using vegetable oil or baby oil. Lubricate the glue base with natural oil, then gently rub it into the object. It will take time to achieve the result, as the chemical processes must begin. The effect is due to the following fact: many adhesives are created on an oil base. After the main stage of the procedure, it is recommended to remove the remains of the glue with soapy water.

Vinegar

This product consists of acetic acid and ordinary water, so that the glue can be removed from the object. The effect depends on how properly the proportions of vinegar are applied. The agent should dissolve the glue, so it should be enough. The optimal waiting period is 20 minutes. To remove the glue, a natural cloth is recommended.

Soda

Prepare a baking soda paste. The mass should be thick, so it is desirable to mix a tablespoon of baking soda and an ordinary spoonful of water. Apply the baking soda paste in a neat layer on the glue. Now you need to wait, because the necessary processes will not immediately begin to occur. Clean the glue. Use lukewarm water. Baking soda paste is not dangerous, so it is used in a variety of situations.

Vaseline

Rub a minimal amount of this product on a layer of glue. Add petroleum jelly as needed. Watch the process carefully to see if Vaseline is needed or not. Wipe the contaminated area with warm water, rinse with soap and water to bring the area back to its original condition.

Hair Dryer

It is advisable to heat the glue with a hair dryer. The heat will soften the layer created. Then, using a suitable washcloth, separate the glue from the item. The best option is a metal scraper, which allows you to achieve the desired result in a minimum amount of time.

Ice

It is recommended to put the object on which the glue has remained in the freezer. The cold will work, after which the glue will be removed. Wait a couple of hours, wanting to achieve a decent effect. If you can not put the thing in the refrigerator, use an ice pack. The glue will become brittle due to the influence of the cold, as a result of which you will be able to scrape it off with ease. Wanting to achieve decent results, use a special scraper that allows you to successfully remove the glue layer.

Solvents

Use gasoline, which will successfully remove the adhesive from the surface. If you wish, use paint thinner, which has a similar effect. Moisten a cotton pad in the selected product, and then press it to the adhesive base. Rinse the object with soapy water, removing any residue.

Goo Cleaner

This product allows you to wash your hands of dried glue residue. When planning a construction or repair job, knowing that contact with glue is inevitable, use a Goo Cleaner product that has gained a high level of popularity. The product is sold in construction stores, so there will be no difficulties with the purchase.
Goo Cleaner will remove the glue quickly and painlessly, and it can be used even for hands. Apply the selected product on a sponge, and then thoroughly wipe the dirty surface. Subsequently, the stains will successfully dissolve. The residue will be removed from the fabric and natural wood without negative consequences. By studying the current offerings, you will be able to make the right choice regarding the remedy. A small amount will be needed to remove the glue. The effect will be achieved in a few minutes. The procedure is effortless, thanks to which an optimal result is guaranteed. If desired, repeat the procedure, as this will increase the chances of a favorable outcome. An additional option is a special preparation designed to remove cured glue.